SUP-DP Ultrasonic Water Level Meter

---

Introduction

This ultrasonic level meter (for material and liquid level measurement) is a non-contact highly reliable and cost-effective material level measuring instrument which is easily installed and maintained. It can meet most of the material level measurement requirements without touching the medium. It is a new generation ultrasonic level meter with fully independent property rights developed by the company via years of hard work.

Solid Measurement

Similar to liquid medium measurement, the meter can be installed on the counter flange of container connecting pipe. The solid reflecting surface is different from that of the liquid and it is not a plane, which shall be considered during installation. The probe emitting surface shall be perpendicular to the surface of solid to be measured and the probe shall be exposed from the connecting pipe.
 
At the solid measurement site, in most cases, probe inside the connecting pipe will lead to pulsating of measured data or "wave loss". To solve the problem, the universal flange can be used. In this case, the probe emitting surface can easily be aligned to the reflecting surface of the solid to be measured merely by rotating the flange.

Specification

Product	Ultrasonic Water Level Meter
Model	SUP-DP
Measure Range	5m, 10m, 15m, 20m, 30m, 40m, 50m
Blind Zone	＜0.3-2.5m（different for range）
Accuracy	1%
Display	LCD
Output (Optional)	Four-wire 4～20mA/510Ωload
	Two-wire 4～20mA/250Ω load
	2 relays (AC 250V/ 8A or DC 30V/ 5A  )
Temperature	LCD: -20～+60℃; Probe: -20～+80℃
Power Supply	24VDC (Optional: 220V AC+15%  50Hz)
Power Consumption	<1.5W
Protection Degree	IP65

Application

Product Details