Welcome To Meacon Automation Co.,Ltd
The turbidity sensor for water quality can be easily installed in the pool, drain, pressure pipe or natural water body, and the sludge concentration meter can automatically compensate for disturbances caused by pollution.
The turbidity sensor for water quality is based on the combined infrared absorption and scattering light method, where the infrared light from the light source is scattered by the suspended particles in the sample and finally converted into an electrical signal by a photoelectric detector, and the suspended matter/sludge concentration value of the sample is obtained after analog and digital signal processing.
The turbidity sensor is commonly used in the online monitoring of suspended matter/sludge concentration in various processes of wastewater treatment plants; various industrial processes of water and wastewater treatment processes.
|
Product |
Turbidity Sensor For Water Quality |
|
Measure Range |
0.01-100 NTU, 0.01－4000 NTU |
|
Indication Resolution |
Less than ± 2% of the measured value, or ± 0.1 NTU Maximax criterion |
|
Pressure Range |
≤0.4MPa |
|
Flow Velocity |
≤2.5m/s, 8.2ft/s |
|
Environment Temp |
0~45℃ |
|
Calibration |
Sample Calibration, Slope Calibration |
|
Cable Length |
Standard 10-Meter Cable, Max Length: 100 Meters |
|
High Voltage Baffle |
Aviation Connector, Cable Connector |
|
Main Materials |
Main Body:SUS316L (Ordinary Version), Titanium Alloy (Seawater Version) Upper and Lower Cover: PVC; Cable: PVC |
|
Ingress Protection |
IP68 |
|
Weight |
1.65 KG |
