Welcome To Meacon Automation Co.,Ltd
The water sample cup has anti-fog performance: so this industrial turbidity sensor can be used for turbidity measurement of water samples even in rainy season.
The online sludge concentration meter (Industrial Turbidity Sensor) is one of the intelligent online chemical analysis instruments. Based on the principle of combined infrared absorption and scattering light method, the ISO7027 method can be used to continuously and accurately measure turbidity or sludge concentration and can be widely used in sewage plants, water plants, water stations, surface water, industry, and other fields for turbidity monitoring.
Continuous monitoring data can be transmitted to remote monitoring and recording by connecting the transmitter and output to the recorder, or it can be connected to the RS485 interface through MODBUS-RTU protocol to facilitate the connection to the computer for monitoring and recording.
| Product | Industrial Turbidity Sensor, Suspended Solids/ TSS/ MLSS Meter |
| Model | SUP-PSS100 |
| Measure Range | 0.1 ~ 20000 mg/L; 0.1 ~ 45000 mg/L; 0.1 ~ 120000 mg/L |
| Indication Resolution | Less than ± 5% of the measured value |
| Pressure Range | ≤0.4MPa |
| Flow Velocity | ≤2.5m/s, 8.2ft/s |
| Storage Temperature | -15~65℃ |
| Operating Temp | 0~50℃ |
| Calibration | Sample Calibration, Slope Calibration |
| Cable Length | Standard 10-Meter Cable, Max Length: 100 Meters |
| High Voltage Baffle | Aviation Connector, Cable Connector |
| Main Materials | Main Body: SUS316L (Ordinary Version), |
| Titanium Alloy (Seawater Version) | |
| Upper and Lower Cover: PVC; Cable: PVC | |
| Ingress Protection | IP68(sensor) |
| Power Supply | AC220V±10%, 5W Max, 50Hz/60Hz |
