Welcome To Meacon Automation Co.,Ltd
Home > > SUP-RD901 Radar Water Level Sensor
SUP-RD901 Radar Water Level Sensor

SUP-RD901 Radar Water Level Sensor

Radar level meter adopts the measurement method of microwave pulse, and can be normal in the industrial frequency band range, low beam energy, can be installed in a variety of metal, non-metallic containers or pipelines, non-contact continuous measurement


Introduction

The radar water level sensor antenna transmits a very narrow microwave pulse, this pulse to the speed of light propagation in space, encountered by the measured media surface, part of its energy is reflected back, received by the same antenna. The time interval between the transmitting pulse and the receiving pulse is proportional to the distance from the antenna to the surface of the measured medium. Due to the extremely high propagation speed of electromagnetic waves, the time interval between the transmitted and received pulses is very small (nanosecond order) and difficult to confirm. SUP-RD901 series 26G radar water level meter adopts a special demodulation technology, which can accurately identify the time interval between the transmitted and received pulses, so as to further calculate the distance from the antenna to the surface of the measured medium.

Specification

 Product  Radar Water Level Sensor
 Model SUP-RD901
 Measure Range 0-10 meters
 Application Corrosive liquid
 Process Connection Thread, Flange
 Medium Temperature -40℃~130℃
 Process Pressure    -0.1~0.3MPa
 Accuracy ±5mm(Less than 5 m) / ±10mm (5~10 m)
 Protection Grade IP67
 Frequency Range 26GHz
 Signal Output 4-20mA
RS485/Modbus
 Power Supply DC(6~24V)/ Four-wire
DC 24V / Two-wire

Radar Water Level Sensor wholesale

Product Size

Radar Water Level Sensor supplier

 

Installation Guide

Radar Water Level Sensor manufacturer Radar Water Level Sensor for sale Radar Water Level Sensor with wholesale price

Be installed in the diameter of the 1/4 or 1/6.   

Note: The minimum distance from the tank 

wall should be 200mm.

Note:  ① datum 

②The container center or axis of symmetry

The top conical tank level, can be installed at 

the top of the tank is intermediate, can guarantee 

the measurement to the conical bottom

 A feed antenna to the vertical alignment surface.  

 If the surface is rough, stack angle must be used 

 to adjust the angle of cardan flange of the antenna 

 to the alignment surface. 

  (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.)