Welcome To Meacon Automation Co.,Ltd
Home > > SUP-pH5011 Glass Sensor pH Industrial
SUP-pH5011 Glass Sensor pH Industrial

SUP-pH5011 Glass Sensor pH Industrial

Industrial pH meter, a commonly used industrial instrument and equipment, is mainly used to precisely measure the acidity and alkalinity value of liquid media. To buy pH meter equipment in large quantity, choose Supmea is right.


During the dosing control process, it is required to automatically detect the pH value of the measured liquid through the online pH meter, convert it into a current signal by setting the control range, and output it to the automatic dosing metering pump. The automatic dosing metering pump (setting the range of received signals and output frequency range) automatically adjusts the dosing amount of the metering pump through the received signal.

The dosing system is a complete set of equipment integrating dosing, mixing, liquid transportation, and automatic control. It is used for raw water, boiler feed water, oilfield surface gathering, and transportation dehydration treatment systems in power plants, various petrochemical dosing systems, and wastewater treatment systems.

In this process, the change of pH value is particularly important, which tests the sensitivity, accuracy, and stability of the online pH meter. Therefore, the selection of a pH meter is particularly important in the dosing control system. The pH controller is recommended to use the product with an anti-crash function and abnormal relay automatic disconnection protection function.

In general, the relay control of the pH controller (sensor pH industrial) is most commonly used in sewage treatment and occasions with low precision requirements.


  Product    Sensor pH Industrial
  Model   SUP-PH5011
  Measurement Range   2 ~ 12 pH
  Zero Potential Point   7 ± 0.5 pH
  Slope   > 95%
  Internal Impedance   150-250 MΩ(25℃)
  Practical Response Time   < 1 min
  Installation Size   Upper and Lower 3/4NPT Pipe Thread
  NTC   NTC10K/Pt100/Pt1000
  Heat Resistance   0 ~ 60℃ for general cables
  Pressure Resistance   0 ~ 4 Bar
  Connection   Low-noise cable

sensor pH electrode industrial wholesale