Welcome To Meacon Automation Co.,Ltd
As a professional electro magnetic flow meter supplier in China, we provides high-quality and durable electro magnetic flow meters for sale. You can wholesale and buy bulk flow meters here.
Electromagnetic flowmeters (EMF) is the 20th century 50 ~ 60 years with the development of electronic technology and the rapid development of new flow measurement instrument. Electromagnetic flowmeter is the application of electromagnetic induction principle, according to the conductive fluid through the applied magnetic field when the induction of electric potential to measure the flow of conductive fluid an instrument.
SUP-LDG electromagnetic flow meters are applicable to all conductive liquids. Typical applications are monitoring the accurate measurement, metering and custody transfer of liquids. It can display instantaneous and cumulative flow rate, support analog output, communication output and relay control function.
| Product | Electro Magnetic Flow Meter |
| Model | SUP-LDG |
| Diameter Nominal | DN15~DN1000 |
|
Nominal Pressure |
DN6 - DN80, PN<4.0MPa |
| DN100 - DN150, PN<1.6MPa | |
| DN200 – DN1000, PN<1.0MPa | |
| DN1200 – DN2000, PN<0.6MPa | |
| Accuracy | ±0.5%，±2mm/s(flowrate<1m/s) |
| Repetitiveness | 0.15% |
| Liner Material | PFA, F46, Neoprene, PTFE, FEP |
| Electrode Material | Stainless steel SUS316, Hastelloy C, Titanium, |
| Tantalum, Platinum-iridium | |
| Medium Temperature | Integral type: -10℃~80℃ |
| Split type: -25℃~180℃ | |
| Power Supply | 100-240VAC，50/60Hz / 22VDC—26VDC |
| Electrical Conductivity | Water 20μS/cm other medium 5μS/cm |
| Ingress Protection | IP65, IP68(optional) |
| Product Standard | JB/T 9248-2015 |
Other liquid: Min. 5μS/cm
The electro magnetic flow meter works based on Faraday's law, and measure conductive medium with conductivity more than 5 μs/cm and flow range from 0.2 to 15 m/s. An electromagnetic flow meter is a volumetric flow meter that measures the flow velocity of a liquid through a pipe.
The measurement principle of magnetic flowmeters can be described as follows: when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:
E=K×B×V×D
|
Where: |
  |
Support 4-20mA output of m³/h, L/h, T/h and other units, RS485 Modbus-RTU protocols are also available.
360° rotating display interface, easy to read the flow and set parameters whatever how you install it.
