SUP-P260 Hydrostatic Type Level Transmitter

Introduction

The submersible (hydrostatic) level meter is based on the principle that the static pressure of the measured liquid is proportional to the height of the liquid, and is made of advanced isolated diffusion silicon sensitive element or ceramic capacitive pressure sensitive sensor, which converts the static pressure into an electrical signal, and then after temperature compensation and linearity correction, into a standard electrical signal (generally 4-20mA/1-5VDC), a pressure sensor for measuring liquid level, which can also be called "hydrostatic level meter, liquid level transmitter, liquid level sensor, water level sensor".

The sensor part of the input hydrostatic level transmitter can be put directly into the liquid, and the transmitter part can be fixed by flange or bracket, so it is extremely convenient to install and use. This two-wire hydrostatic level meter consists of a special pilot cable with built-in capillary hose, a pressure-resistant connector and a probe. The probe construction of the input level meter is a stainless steel cylinder core with a diaphragm at the bottom and is covered by a perforated plastic housing. The level measurement is actually the difference between the static pressure of the liquid on the probe and the actual atmospheric pressure, which is then converted into a 4-20mA output signal by a ceramic sensor (attached to a stainless steel membrane) and electronic components.

Features

Good stability and high precision. Directly into the measured medium, installation and use is very convenient. Solid-state structure, no moving parts, high reliability, long service life from water, oil to viscous paste can be measured with high accuracy, not affected by the measured medium foaming, deposition, electrical characteristics. Wide range of temperature compensation. With power reverse polarity protection and overload current limit protection.

Specification

Application

Product Details